Deep Trenching: BSV 6000

DESCRIPTION:

Steenbergen Hollanddrain was the first to introduce a range of trenching models working at an excavation boom angle of about 90 degrees. After over 30 years of experience since the introduction of the first model, the vertical trenching terrain is almost exclusive for SHD.
Currently the Steenbergen BSV models are marketed both with full hydraulic and hydro-mechanical crawler drive as well as with mechanical and full hydraulic drive of special digging chain. It is capable of coping with high pull necessity in the usually unknown ground conditions to a depth of 8m.
The BSV 6000 is a perfect technical master piece appearing practically exclusively in the machine parks of very professional contractors.
Most frequent applications are dewatering, inwatering, foundation, impervious diaphragm erection, bentonite isolations (slurry walls), star tributaries for irrigation deep well construction.
The biggest model available is the M-class MSV 11000 with an impressive 90 ton weight, trenching to a depth of 10.5 m and equipped with more than 1000HP engine power.

 

IN A NUTSHELL:

• 8 meter deep narrow chain trenching.
• Equipped with tir-o-matic (fully automated cruise control) joy-stick command.
• Automatic spoil evacuation overhead • Applied for slurry and diaphragm wall installation (bentonite, synthetic sheeting), interception drains, gas and water-line de- and in- watering systems.
• Buckets with exchangeable cutting edges short curvature hydraulic depths adjustment vertical digging angle

 

TECHNICAL SPECIFICATIONS:

Engine: Caterpillar 3408E ATAAC.
Power: 466 kW (625HP).
Fuel tank: 1000 liters.
Track drive: Hydrostatic, 2 pumps and 2 motors, variable, Brueninghaus Hydromatic 2 planetary final drive.
s Travel speed: 0 - 3500 m/hr variable.
Operation speed: 0 - 500 m/hr variable.
Tracks Equivalent: Cat D5B, hydraulic extending, length c/c 5275 mm, overall length 6080 mm.
Track plates: 800 mm triple grouser.
Track width: c/c 2100 mm, overall transportation width 2900 mm, overall operation width 3800 mm.
Digging chain: Roller chain, 125 mm pitch with buckets.
Digging chain drive: hydrostatic, 2 pumps variable, Brueninghaus Hydromatic, 2 motors RHL series SMA, capable of transmitting full engine power.
Digging chain speed: 0 - 4.70 m/sec.
Digging depth: 8000 mm.
Spoil evacuation: Overhead.
Curvature: 2 x 12 degrees.
Tilt: 2 x 8 degrees.
Weight: Approx. 45 tons.

inquire now